[c-nsp] How can enable PfR PIRO function on IOS 12.4(24)T

[Darren Yang]

Hi,

The Cisco introduced PfR can support OSPF as parent route on IOS
12.4(24)T and this term is PIRO(Protocol Independent Route
Optimization).
Detail link this:
http://www.cisco.com/en/US/docs/ios/oer/configuration/guide/oer-trf_rte_ctl.html#wp1060987

But when I use 12.4(24)T in Cisco 1812 module, I didn't see any PIRO
information can support OSPF when I type 'sh oer master prefix', like
below...

#sh oer master prefix
192.168.1.2/32            DEFAULT*       92 172.17.11.254   Tu11   U
                              U        U        0        0        0        0
                              N        N        N        N        1        1

#sh ip route ospf
O       192.168.1.0/24 [110/11] via 10.0.0.1, 02:46:06, Tunnel11
                      [110/11] via 10.1.1.1, 02:46:06, Tunnel12

Before 12.4(24)T, I use static route as parent route and it works
well. But I really want to use OSPF as PfR parent route because static
route would make route fail when gateway couldn't arrive.

Anyone have idea about this ?

Thanks and Regards,

Pigsign