[c-nsp] WS-X6748-SFP temperature sensor

[Martin Moens]

Do a snmpwalk on 1.3.6.1.4.1.9.9.13.1.3.1, this gives info on all the temp
sensors in the box.

Martin


On Wednesday, 15 April, 2009 07:10 Engelhard Labiro <> wrote:

> Couldn`t find doco on cisco that state it has a temp.sensor..but
> "sh env" of the module indicates that the chassis is able to show the
> temp. of the card.
> 
> sh module
> Mod Ports Card Type                              Mode
> --- ----- -------------------------------------- ------------------
>  1    8  CEF720 8 port 10GE with DFC            WS-X6708-10GE
>  2    8  CEF720 8 port 10GE with DFC            WS-X6708-10GE
>  3   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP
>  4   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX
>  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B
> 
> xxxxx>sh environment temperature module 3
>  module 3 outlet temperature: 50C
>  module 3 inlet temperature: 36C
>  module 3 device-1 temperature: 36C
>  module 3 device-2 temperature: 46C
> 
> 2009/4/15 Hiromasa Sekiguchi <hiromasa.sekiguchi at ctc-g.co.jp>:
>> Hi all,
>> 
>> Does WS-X6748-SFP have temperature sensor?
>> 
>> Can we confirm it on cisco web site?
>> 
>> Regards,
>> Hiromasa
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/