[c-nsp] ME3400 uRPF

[Adrian Minta]

According to "Cisco ME 3400 data sheet" http://tinyurl.com/yphgj5 the 
switch support uRPF with METROIPACCESS image, but I get the following error:
switch(config)#interface GigabitEthernet0/2
switch(config-if)#ip verify unicast reverse-path
% ip verify configuration not supported on interface Gi0/2
 - verification not supported by hardware

Does anyone knows the magic needed to make uRPF work on this switch ?

System image file is "flash:me340x-metroipaccess-mz.122-40.SE/me340x-metroipaccess-mz.122-40.SE.bin"
cisco ME-3400G-12CS-A (PowerPC405) processor (revision C0) with 118784K/12280K bytes of memory.

Interface GigabitEthernet0/2 is in routed mode (no switchport).

-- 
Best regards,
Adrian Minta