[c-nsp] ME3400 uRPF

[Tassos Chatzithomaoglou]

uRPF is for VRFs in the ME-3400 (strange, isn't it?)

-- 
Tassos

Adrian Minta wrote on 15/04/2009 12:36:
> According to "Cisco ME 3400 data sheet" http://tinyurl.com/yphgj5 the 
> switch support uRPF with METROIPACCESS image, but I get the following 
> error:
> switch(config)#interface GigabitEthernet0/2
> switch(config-if)#ip verify unicast reverse-path
> % ip verify configuration not supported on interface Gi0/2
> - verification not supported by hardware
> 
> Does anyone knows the magic needed to make uRPF work on this switch ?
> 
> System image file is 
> "flash:me340x-metroipaccess-mz.122-40.SE/me340x-metroipaccess-mz.122-40.SE.bin" 
> 
> cisco ME-3400G-12CS-A (PowerPC405) processor (revision C0) with 
> 118784K/12280K bytes of memory.
> 
> Interface GigabitEthernet0/2 is in routed mode (no switchport).
>