[c-nsp] ME3400 uRPF

[Dan Armstrong]

It doesn't.

I so wish it did, but no dice.




On 15-Apr-09, at 5:36 AM, Adrian Minta wrote:

> According to "Cisco ME 3400 data sheet" http://tinyurl.com/yphgj5  
> the switch support uRPF with METROIPACCESS image, but I get the  
> following error:
> switch(config)#interface GigabitEthernet0/2
> switch(config-if)#ip verify unicast reverse-path
> % ip verify configuration not supported on interface Gi0/2
> - verification not supported by hardware
>
> Does anyone knows the magic needed to make uRPF work on this switch ?
>
> System image file is "flash:me340x-metroipaccess-mz.122-40.SE/me340x- 
> metroipaccess-mz.122-40.SE.bin"
> cisco ME-3400G-12CS-A (PowerPC405) processor (revision C0) with  
> 118784K/12280K bytes of memory.
>
> Interface GigabitEthernet0/2 is in routed mode (no switchport).
>
> -- 
> Best regards,
> Adrian Minta
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/