[c-nsp] cisco command to show 10GE module type?

[Richardson, Robert]

Try:

show interface status
show inventory

Thanks,

Robert M. Richardson

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Neil d
Sent: Friday, April 17, 2009 7:04 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] cisco command to show 10GE module type?

Hi all,

Is there any command to show what kind of Xenpak 10G module in the 6704-10GE
card? from cisco website, there're a bunch of them:

Cisco XENPAK-10GB-CX4: .
* Cisco XENPAK-10GB-LX4:
* Cisco XENPAK-10GB-LRM:
* Cisco XENPAK-10GB-SR:
* Cisco XENPAK-10GB-LR / -LR+:
* Cisco XENPAK-10GB-ER / -ER+
* Cisco XENPAK-10GB-ZR:
* Cisco XENPAK-10GB-LW (WAN PHY):

question is, how do I know which type is installed in the LC? any command to
check this instead of going onsite to check?

TIA/Neil
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/