[c-nsp] cisco command to show 10GE module type?

[Engelhard Labiro]

Use command "show int status"

Sent from my iPhone

On 2009/04/18, at 11:04, Neil d <neilding2000 at gmail.com> wrote:

> Hi all,
>
> Is there any command to show what kind of Xenpak 10G module in the  
> 6704-10GE
> card? from cisco website, there're a bunch of them:
>
> Cisco XENPAK-10GB-CX4: .
> • Cisco XENPAK-10GB-LX4:
> • Cisco XENPAK-10GB-LRM:
> • Cisco XENPAK-10GB-SR:
> • Cisco XENPAK-10GB-LR / -LR+:
> • Cisco XENPAK-10GB-ER / -ER+
> • Cisco XENPAK-10GB-ZR:
> • Cisco XENPAK-10GB-LW (WAN PHY):
>
> question is, how do I know which type is installed in the LC? any  
> command to
> check this instead of going onsite to check?
>
> TIA/Neil
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/