[c-nsp] cisco command to show 10GE module type?

[John Jensen]

"show int status" will give you the transceiver type, if you want more
gory details, you can use "show idprom int x/x" which will give you
the serial and more info of a particular transceiver.

-JJ

On Sat, Apr 18, 2009 at 7:21 AM, Nick Griffin
<nick.jon.griffin at gmail.com> wrote:
> can you use "show interface capabilities"?
>
> On Fri, Apr 17, 2009 at 11:41 PM, Engelhard Labiro
> <engel.labiro at gmail.com>wrote:
>
>> Use command "show int status"
>>
>> Sent from my iPhone
>>
>>
>> On 2009/04/18, at 11:04, Neil d <neilding2000 at gmail.com> wrote:
>>
>>  Hi all,
>>>
>>> Is there any command to show what kind of Xenpak 10G module in the
>>> 6704-10GE
>>> card? from cisco website, there're a bunch of them:
>>>
>>> Cisco XENPAK-10GB-CX4: .
>>> • Cisco XENPAK-10GB-LX4:
>>> • Cisco XENPAK-10GB-LRM:
>>> • Cisco XENPAK-10GB-SR:
>>> • Cisco XENPAK-10GB-LR / -LR+:
>>> • Cisco XENPAK-10GB-ER / -ER+
>>> • Cisco XENPAK-10GB-ZR:
>>> • Cisco XENPAK-10GB-LW (WAN PHY):
>>>
>>> question is, how do I know which type is installed in the LC? any command
>>> to
>>> check this instead of going onsite to check?
>>>
>>> TIA/Neil
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>