[c-nsp] Easy way to configure/build new switches?

Mesiatowsky, Shawn SMESIATO at petro-canada.ca
Mon Apr 20 15:58:56 EDT 2009


 We use HP Datacenter automation center, formerly opsware. It is great for provisioning equipment, standardizing your IOS, policy compliance, and auditing. I highly recommend this tool

https://h10078.www1.hp.com/cda/hpms/display/main/hpms_content.jsp?zn=bto&cp=1-11-271-273_4000_100__


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tristan Gulyas
Sent: Sunday, April 19, 2009 6:57 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Easy way to configure/build new switches?

Hi all,

We currently do a lot of provisioning of new Cisco 3750G switches.  This seems to be a progressive, ongoing thing.

At present, when we receive a new switch, we need to:

* Upgrade firmware (currently 12.2(50)SE crypto, switches typically ship with 12.2(35)SE5)
* Place our config on the switch
* Configure vlan for management, IP address for management
* Set first switch in stack to priority 15 (not in the config in a "show
run")
* Confgure VTP
* Change SDM template for dual IPv4/IPv6.
* Configure uplinks (and optionally downlinks)

At present, we do a lot of copying/pasting from a template page which is prone to error.  Upgrading the firmware on these switches is also tedious and slow.

Is there a tool or method we could use to quick provision these switches, say, if we could automatically get the new firmware/config template from a TFTP server?  What concerns me is the lines that aren't actually present in the config, i.e. stack priority settings and VTP.

thanks,
Tristan

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

This email communication is intended as a private communication for the sole use of the primary addressee and those individuals listed for copies in the original message. The information contained in this email is private and confidential and If you are not an intended recipient you are hereby notified that copying, forwarding or other dissemination or distribution of this communication by any means is prohibited.  If you are not specifically authorized to receive this email and if you believe that you received it in error please notify the original sender immediately.  We honour similar requests relating to the privacy of email communications.


Cette communication par courrier ?lectronique est une communication priv?e ? l'usage exclusif du destinataire principal ainsi que des personnes dont les noms figurent en copie.  Les renseignements contenus dans ce courriel sont confidentiels et si vous n'?tes pas le destinataire pr?vu, vous ?tes avis?, par les pr?sentes que toute reproduction, transfert ou autre forme de diffusion de cette communication par quelque moyen que ce soit est interdite.  Si vous n'?tes pas sp?cifiquement autoris? ? recevoir ce courriel ou si vous croyez l'avoir re?u par erreur, veuillez en aviser l'exp?diteur original imm?diatement.  Nous respectons les demandes similaires qui touchent la confidentialit? des communications par courrier ?lectronique.


More information about the cisco-nsp mailing list