[c-nsp] Problems with multiple VPDN hops

[Pshem Kowalczyk]

Hi,

{cut}

>
> What I'd like to know is if it's possible to use radius to essentially
> switch packets from one L2TP tunnel into another when they reach LNS2.
>
>
>
> We know that the VPDN and Radius configuration are correct on LNS2
> because we can successfully terminate sessions on this router and assign
> IP addresses
>

We have a very similar setup with multiple 7301 as the devices in the
middle. Works like a charm.
In your radius config above I've noticed that you use the same
NAS-IP-Address twice - is that a typo?

kind regards
Pshem