[c-nsp] WS-C2950G-24-EI memory upgrade

[Jason Link]

I don't believe the 2950's are memory-upgradable.  At least the 2950T-24
and 2950-24 I've got sitting here aren't...



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: Sunday, April 26, 2009 10:17 AM
To: 'Cisco-nsp'
Subject: [c-nsp] WS-C2950G-24-EI memory upgrade

Hi there.

 

We have several WS-C2950G-24-EI switches (AC and DC versions) running..
Most
of them are running 12.1(13)EA1 code and we'd like to upgrade into
12.1(22)EA13 with crypto.

 

These switches have 8 meg flash and 8 meg DRAM today - upgrade in
software
requires 8 meg flash and 16 meg DRAM.  Has anyone done a memory upgrade
on
these?  Is it just a matter of cracking the case and putting a DIMM
module
in?  

 

I'm just trying to understand if anyone has done this and any surprises
they
might have encountered - these switches are in remote locations that
involve
many hours of driving to reach.. rather only do the drive once ;)
Searched
Google and Cisco.com and come up pretty empty - do most people just
replace
these switches?  I hate to go that route if some additional memory can
just
be popped in... 

 

Thanks in advance,

 

Paul

 

 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/