[c-nsp] EoMPLS between subinterface and physical interface

[Tassos Chatzithomaoglou]

Arie,

I'm actually trying something strange in the lab, but i wanted to ask opinions before
trying all the alternatives.

More specifically i want to transfer double tagged traffic from multiple subifs of a local 
MUX-UNI interface to multiple remote physical interfaces, where the outer tag would be 
removed.

CPE <===> 3750 <===> 7600-1 <= MPLS-network => 7600-2 <===> CPE-x


Something like:

7600-1
------
int gi1/1
  desc conn to 3750
  switch mode trunk		! these are single-tagged vlans following another path
int gi1/1.100
  enc dot 100			! this is double-tagged that needs to be tunneled
  xconnect x2.x2.x2.x2 y1
int g1/1.200
  enc dot 200			! this is double-tagged that needs to be tunneled
  xconnect x2.x2.x2.x2 y2

7600-2
------
int gi1/1
  desc conn to CPE-1
  xconnect x1.x1.x1.x1 y1
int gi1/2
  desc conn to CPE-2
  xconnect x1.x1.x1.x1 y2

So double-tagged traffic having an outer vlan of 100, would get transfered from 7600-1 
gi1/1.100 to 7600-2 gi1/1, where it would/should have the outer vlan removed. It's 
actually like many L2 VPNs starting from one port on 7600-1 and ending at many ports (each 
one on its own) on 7600-2.



-- 
Tassos



Arie Vayner (avayner) wrote on 17/08/2009 21:57:
> Tasso,
> 
> What are you trying to achieve?
> 
> Arie
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Tassos
> Chatzithomaoglou
> Sent: Monday, August 17, 2009 20:04
> To: cisco-nsp
> Subject: [c-nsp] EoMPLS between subinterface and physical interface
> 
> I'm reading under EoMPLS Guidelines and Restrictions
> http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/gu
> ide/pfc3mpls.html#wp1109041
> 
> ======================================
> For a particular EoMPLS connection, both the ingress EoMPLS interface on
> the ingress PE and the egress EoMPLS interface 
> on the egress PE have to be subinterfaces with dot1Q encapsulation or
> neither is a subinterface.
> ======================================
> 
> So, i guess in PFC-based EoMPLS you can't have a subinterface on one
> side (vlan mode) and a physical interface (port 
> mode) on the other side.
> 
> Besides using ES/SPA cards and scalable EoMPLS on both sides, is there
> another solution?
> 
> What about scalable EoMPLS on one side and PFC-based EoMPLS (vlan or
> port mode) on the other? Has anyone tried it?
> 
> --
> Tassos
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>