[c-nsp] EoMPLS between subinterface and physical interface

[Arie Vayner (avayner)]

This is true.
The only way to get rid of the global VLAN scope is by using SIP/ES
modules (which require SR software)
Arie

-----Original Message-----
From: Gert Doering [mailto:gert at greenie.muc.de] 
Sent: Tuesday, August 18, 2009 19:38
To: Arie Vayner (avayner)
Cc: Tassos Chatzithomaoglou; cisco-nsp
Subject: Re: [c-nsp] EoMPLS between subinterface and physical interface

Hi,

On Tue, Aug 18, 2009 at 05:19:51PM +0200, Arie Vayner (avayner) wrote:
> What I am not sure is whether the 7600 would even allow you to put an 
> access port on the same VLAN used on the sub-if. No quick way for me 
> to test it right now.

Not with SX* software - VLAN space is global, and a VLAN can only be
used either as "VLAN" stuff (switchport mode access, interface vlan X)
or as subinterface stuff (encaps dot1q Y).

I'm reasonably sure that it won't work with SR* software either, as it
is just the way this hardware works.

gert

--
USENET is *not* the non-clickable part of WWW!
 
//www.muc.de/~gert/
Gert Doering - Munich, Germany
gert at greenie.muc.de
fax: +49-89-35655025
gert at net.informatik.tu-muenchen.de