[c-nsp] dns resolution not working with vrfs

[Ivan Pepelnjak]

"ip name-server VRF name address" specifies the DNS server to use for
operations in the specified VRF (for example, when doing traceroute, telnet
or ping on the PE-router within the VRF).

A bit more is written here:

http://www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/tvrfdn
s.html

Ivan
 
http://www.ioshints.info/about
http://blog.ioshints.info/


> -----Original Message-----
> From: luismi [mailto:asturluismi at gmail.com] 
> Sent: Tuesday, August 25, 2009 3:03 PM
> To: Phil Mayers
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] dns resolution not working with vrfs
> 
> #ping vrf FW2INET www.google.es
> 
> Translating "www.google.es"...domain server (199.45.32.40) [OK]
> 
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 64.233.169.99, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 
> 116/119/120 ms
> 
> 
> quite interesting...
> 
> Thanks for that point of view
> 
> 
>