[c-nsp] SXI1 and 2 breaks 100FX-MM boards

[Jeff Fitzwater]

Forgot to note that with SXI  they work.   Its the version 1 and 2  
that have the problem.


Jeff
On Aug 27, 2009, at 5:42 AM, Jeff Fitzwater wrote:

> We have 24 port 100FX MM boards WS-X6324-100FX-MM in a 13 slot  
> chassis, and none of these modules come up all the way with SXI1 or 2.
>
> In Version 1 the modules were not even recognized yet were a  
> supported device.  In rev 2 they are recognized and indicate that  
> they pass the diags after reload, but the status of module stays in  
> OTHER and ports are non functional.
>
> The fix was suppose to be in rev SXI 2.
>
> Has anybody else seen this?
>
>
>
>
> Jeff Fitzwater
> OIT Network Systems
> Princeton University
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/