[c-nsp] SXI1 and 2 breaks 100FX-MM boards

[Alan Buxey]

Hi,
> We have 24 port 100FX MM boards WS-X6324-100FX-MM in a 13 slot chassis, 
> and none of these modules come up all the way with SXI1 or 2.
>
> In Version 1 the modules were not even recognized yet were a supported  
> device.  In rev 2 they are recognized and indicate that they pass the  
> diags after reload, but the status of module stays in OTHER and ports  
> are non functional.
>
> The fix was suppose to be in rev SXI 2.
>
> Has anybody else seen this?

I always check the release notes - expecially for older line cards


support depends on the supervisor being used from the looks of things - 

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/ol_14271.html#wp2563690

alan