[c-nsp] Cisco L2 QoS

[Frank Bulk]

Don't forget that there's two enhanced ports on that unit....they have more
QoS capabilities.

Frank

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mohammad Khalil
Sent: Sunday, December 06, 2009 7:34 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco L2 QoS


hi all

i have cisco metroethernet switches 3750

i have some customers connected to some ports (the ports are access ports ,
layer2 ports)

i am trying to apply rate limit on the bandwidth each customers consume 

rate limit command applies for layer 3 interfaces which does not match my
case

what should i do to achieve this ??

even though applying rate limit on the logical interface (interface vlan)
does not work

as well as the MQC model does not apply


                      
_________________________________________________________________
Windows Live: Friends get your Flickr, Yelp, and Digg updates when they
e-mail you.
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/soc
ial-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_3:092010
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/