[c-nsp] Cisco L2 QoS

[Mohammad Khalil]

the problem is that the customers are connected to the 24 Fast Ethernet ports

> From: frnkblk at iname.com
> To: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] Cisco L2 QoS
> Date: Sun, 6 Dec 2009 21:58:27 -0600
> 
> Don't forget that there's two enhanced ports on that unit....they have more
> QoS capabilities.
> 
> Frank
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mohammad Khalil
> Sent: Sunday, December 06, 2009 7:34 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco L2 QoS
> 
> 
> hi all
> 
> i have cisco metroethernet switches 3750
> 
> i have some customers connected to some ports (the ports are access ports ,
> layer2 ports)
> 
> i am trying to apply rate limit on the bandwidth each customers consume 
> 
> rate limit command applies for layer 3 interfaces which does not match my
> case
> 
> what should i do to achieve this ??
> 
> even though applying rate limit on the logical interface (interface vlan)
> does not work
> 
> as well as the MQC model does not apply
> 
> 
>                       
> _________________________________________________________________
> Windows Live: Friends get your Flickr, Yelp, and Digg updates when they
> e-mail you.
> http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/soc
> ial-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_3:092010
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
 		 	   		  
_________________________________________________________________
Windows Live: Make it easier for your friends to see what you’re up to on Facebook.
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_2:092009