[c-nsp] Catalyst 6509 and 802.1p

[Arie Vayner (avayner)]

This is the document:
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12
.2SX/configuration/guide/qos.html


As you most likely want to apply a policy for a specific VLAN on a
trunk, you should look at:
http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12
.2SX/configuration/guide/qos.html#wp1726124

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Roman Serbski
Sent: Thursday, December 10, 2009 10:54
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Catalyst 6509 and 802.1p

Hi list-

Appreciate your guidance on the following question.

We have two Catalyst 6509 interconnected over fiber with a number of
VLANs shared between two switches.  I setup another VLAN with two
ports in total (one port on each switch) and would like to give the
highest priority to traffic traversing between two ports.  I searched
archives for mls-qos and policy map but it seems that most responses
are related to 35xx switches.  Could someone advise me on
documentation I should read in order to implement 802.1p on 65xx
Catalyst switches?

Thank you for your time.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/