[c-nsp] Policers on 6500 Sup-32

[Ian MacKinnon]

Hi All,

I am having an issue with policers on a 6500 not actually doing any 
policing.  Running 12.2(33)SXH

I have config like :-
interface Vlan666
  ip address 10.10.10.1 255.255.255.252
  no ip redirects
  logging ip access-list cache out
  service-policy input 2MegPolice
  service-policy output 2MegPolice

policy-map 2MegPolice
   class class-default
    police 2097000 13000    conform-action transmit     exceed-action 
transmit     violate-action drop

So I want to allow a burst and then drop the violate.

A show policy-map interface does not show any exceed or violates.

In mrtg I can see that more than 2Meg is being passed, even as much as 
40M, and I can see the traffic in the destination graphs as well.

Anybody got this working, or seen issues like this?

Thanks
Ian


--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted.  Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison and nPlusOne.
Finally, the recipient should check this email and any attachments for the
presence of viruses.  Lumison and nPlusOne accept no liability for any
damage caused by any virus transmitted by this email.