[c-nsp] set clock

[George Horton]

Hello

To set the clock use the command 'clock set hh:mm:ss' from enable mode.
NTP can be configured in the global configuration mode use the command
'ntp server hostname'.  The hostname can be an IP or a hostname, just
make sure that you use an NTP server the router/switch can reach.

Cheers
George

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of chloe K
Sent: 02 February 2009 14:20
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] set clock

Hi
   
  I use show clock and get router / swtich time 
  14:15:22.574 UTC Mon Feb 2 2009
   
  But the correct time is 9:14 am Mon Feb 2, 2009
   
  How can I change it?
   
  How can I use the ntp to get the time?
   
  Thank you

       
 
              
---------------------------------
    
       
Yahoo!         Canada Toolbar : Search from anywhere on         the web
and bookmark your favourite sites. Download it now!          
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
______________________________________________________________________

You might be interested in this...

Schools and Colleges for the Future
Find out more about the programmes shaping education for the future.
http://www.rm.com/futureeducation

______________________________________________________________________

P.S. Think Green - don't print this email unless you really need to.


This message is confidential, so please treat it appropriately and for its intended purpose only.  In particular, if it refers to any technical data, terms or prices not generally available or known, such items are "commercially sensitive information" within the terms of the Freedom of Information Act 2000 and related laws.  As it would be prejudicial to RM's commercial interests if these were disclosed, please refrain from doing so.

 

As Internet communications are not secure, please be aware that RM cannot accept responsibility for its contents.  Any views or opinions presented are those of the author only and not of RM.  If you are not the intended recipient of this e-mail, please accept our apologies and arrange for copies of it to be deleted.  For your information, RM may intercept incoming and outgoing email communications.

 

RM Education plc 
Registered Office: New Mill House, 183 Milton Park, Abingdon, Oxfordshire, OX14 4SE, England 
Registered Number: 1148594