[c-nsp] AToM Lab Problem

Wayne Lee linkconnect at googlemail.com
Wed Feb 4 16:10:48 EST 2009


On Wed, Feb 4, 2009 at 8:51 PM, Ibrahim Abo Zaid
<ibrahim.abozaid at gmail.com> wrote:
> Hi All
>
> I was labbing AToM scenario and uses IOS 12.2(33)SRC for ATM AAL5 and ATM
> Cell-relay feature but i can't get dynamips run for this image , it always
> results "*** Error: 209-unable to start VM instance " error messages
>
> any body lab this feature using different image or know how to fix this
> error message ?
>
> complete image name
> c7200p-spservicesk9-mz.122-33.SRC3_3.bin
>
>
> best regards
> --Ibrahim
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


I used the following in my .net file to get a p image to work


[localhost:7201]
    workingdir = /tmp
    udp = 10100
    [[7200]]
        image = /home/dynamips/c7200-spserv.image
        ghostios = True
        # sparsemem = True
        npe = npe-g2


Wayne


More information about the cisco-nsp mailing list