[c-nsp] AToM Lab Problem

[Antonio Soares]

There's another problem: ATM AAL5 over MPLS and ATM Cell Relay over MPLS are not supported with the PA-A1, the only ATM interface
supported by Dynamips.

http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/atom25s.html#wp1068980


Regards,

Antonio Soares, CCIE #18473 (R&S)
amsoares at netcabo.pt

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Wayne Lee
Sent: quarta-feira, 4 de Fevereiro de 2009 21:11
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] AToM Lab Problem

On Wed, Feb 4, 2009 at 8:51 PM, Ibrahim Abo Zaid <ibrahim.abozaid at gmail.com> wrote:
> Hi All
>
> I was labbing AToM scenario and uses IOS 12.2(33)SRC for ATM AAL5 and 
> ATM Cell-relay feature but i can't get dynamips run for this image , 
> it always results "*** Error: 209-unable to start VM instance " error 
> messages
>
> any body lab this feature using different image or know how to fix 
> this error message ?
>
> complete image name
> c7200p-spservicesk9-mz.122-33.SRC3_3.bin
>
>
> best regards
> --Ibrahim
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


I used the following in my .net file to get a p image to work


[localhost:7201]
    workingdir = /tmp
    udp = 10100
    [[7200]]
        image = /home/dynamips/c7200-spserv.image
        ghostios = True
        # sparsemem = True
        npe = npe-g2


Wayne
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/