[c-nsp] 7606 with SPA-2xT3, hot insert - reboot required?

[Graham Wooden]

Bah ... that was the trick.  Thanks Robbie.

-graham

> Have you set "card type t3 2 1"?
> --
> robbie
>
>
>
>
>
>              Graham Wooden
>              <graham at g-rock.ne
>              t>                                                         To
>              Sent by:                  cisco-nsp at puck.nether.net
>              cisco-nsp-bounces                                          cc
>              @puck.nether.net
>                                                                    Subject
>                                        [c-nsp] 7606 with SPA-2xT3, hot
>              02/10/2009 01:43          insert - reboot required?
>              PM
>
>
>
>
>
>
>
>
>
> Hi fellas,
>
> I have a 7606 and I inserted (hot) a SPA-2xT3 card into my SIP400
> subslot (2/1), from which it shows up in various "show" commands
> jst... but I doesn't give me the ability to actually config the
> interfaces on it.  Does it require a reboot for the serial interfaces
> to come up?
>
> 7606, with dual 720's.  Running
> c7600s72033-adventerprisek9-mz.122-33.SRC.bin.
>  From the module guide, this is the first supported rev of this card
> in the slot.
> Any known issues, or does the box need to take a reboot?
>
> Thanks in advance,
>
> -graham
>
>
> Feb  9 14:54:56 CST: %DIAG-SP-6-RUN_MINIMUM: Module 2/1: Running
> Minimal Diagnostics...
> Feb  9 14:54:57 CST: %DIAG-SP-6-DIAG_OK: Module 2/1: Passed Online
> Diagnostics
> Feb  9 14:54:57 CST: %SPA_OIR-6-ONLINECARD: SPA (SPA-2XT3/E3) online
> in subslot 2/1
>
>
> #show hw-module subslot all oir
> Module        Model                Operational Status
> ------------- -------------------- ------------------------
> subslot 2/0   SPA-1XOC12-ATM       ok
> subslot 2/1   SPA-2XT3/E3          ok
>
>
> #show hw-module subslot 2/1 fpd
>
> ==== ====================== ======
> =============================================
>                               H/W   Field Programmable   Current
> Min. Required
> Slot Card Type               Ver.  Device: "ID-Name"    Version
> Version
> ==== ====================== ====== ================== ===========
> ==============
>   2/1 SPA-2XT3/E3             1.1   1-ROMMON               2.12        2.12
>                                     2-I/O FPGA             1.0         1.0
>                                     3-E3 FPGA              1.4         1.4
>                                     4-T3 FPGA              1.4         1.4
> ==== ====================== ======
> =============================================
>
>
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>