[c-nsp] Router requirement

[Garry]

Pete Barnwell wrote:
> Hi,
> 
> Wonder if anybody can help me with selecting the right router for CPE?
> It needs to be able to handle 100Mb/s delivered over FE, doing a bit of
> QoS and a few ACLs but no dynamic routing protocols.

If you can live with a worst-case scenario of 87MBit, a 2821 might be
decent choice, too. Typical throughput, even with moderate QoS/ACL
should be well over 100M (maybe even with a 2811). Otherwise, a 3825
with its two 1G interfaces built in would be a real good alternative to
the rather pricey 72k ...

-garry