[c-nsp] flash disk problem

[Alex Wa]

Thanks,charles
 
Firmware version is 6.1(3), see below output, but i don't undertand why the Sw column is not showing the correct boostrap image that the switch is loading. Now, if it has firmware below 7.1 how can i format and even copy files to and fron the flash? besides when i type verify ? it doesn't show me the disk0: option but I can copy to disk0: . the same happens with slavedisk0:
 
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1    2  Catalyst 6000 supervisor 2 (Standby)   WS-X6K-SUP2-2GE    SAL06230SDB
  2    2  Catalyst 6000 supervisor 2 (Active)    WS-X6K-S2U-MSFC2   SAD061503XZ
  3   48  48 port 10/100 mb RJ45                 WS-X6348-RJ-45     SAD04310F81
  4   48  48-port 10/100 mb RJ45                 WS-X6148-RJ-45     SAL0715BQZU
  5   48  48-port 10/100 mb RJ45                 WS-X6148-RJ-45     SAL0715BQZG
  6   48  48 port 10/100 mb RJ45                 WS-X6348-RJ-45     SAL062102WS
  7   48  48 port 10/100 mb RJ45                 WS-X6348-RJ-45     SAL04430GXS
  8   48  48-port 10/100 mb RJ45                 WS-X6148-RJ-45     SAL06447YF0
  9   48  48 port 10/100 mb RJ45                 WS-X6348-RJ-45     SAL0807UBZ5
Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  1  0005.7485.ff70 to 0005.7485.ff71   3.7    6.1(3)       7.5(0.6)HUB1 Ok      
  2  0001.6415.e122 to 0001.6415.e123   3.5   6.1(3)       7.5(0.6)HUB1 Ok      
  3  0001.9753.22b0 to 0001.9753.22df   1.1   5.4(2)       7.5(0.6)HUB1 Ok      
  4  000c.85cf.e2b0 to 000c.85cf.e2df   1.2   5.4(2)       7.5(0.6)HUB1 Ok      
  5  000c.85cf.e3d0 to 000c.85cf.e3ff   1.2   5.4(2)       7.5(0.6)HUB1 Ok      
  6  0009.1267.5d38 to 0009.1267.5d67   6.1   5.4(2)       7.5(0.6)HUB1 Ok      
  7  0003.6c2c.3d40 to 0003.6c2c.3d6f   2.2   5.4(2)       7.5(0.6)HUB1 Ok      
  8  000b.465d.5380 to 000b.465d.53af   1.1   5.4(2)       7.5(0.6)HUB1 Ok      
  9  000e.8481.33c0 to 000e.8481.33ef   7.5   5.4(2)       7.5(0.6)HUB1 Ok      

switch#verify ?
  /md5                 Compute an md5 signature for a file
  bootflash:           File to be verified
  flash:               File to be verified
  slavebootflash:      File to be verified
  slaveslot0:          File to be verified
  slavesup-bootflash:  File to be verified
  slot0:               File to be verified
  sup-bootflash:       File to be verified
  sup-slot0:           File to be verified

--- On Wed, 2/25/09, Church, Charles <cchurc05 at harris.com> wrote:

From: Church, Charles <cchurc05 at harris.com>
Subject: RE: [c-nsp] flash disk problem
To: awain567 at yahoo.com, "lista de correo de cisco" <cisco-nsp at puck.nether.net>
Date: Wednesday, February 25, 2009, 9:55 AM

Does the Sup have Rommon 7.1(1) on it?  Otherwise, it won't understand the
64MB ATA card.  I believe that's the only one that shows up as disk0:.  The
smaller ones aren't ATA, so they're linear and show up as slot0:.  Did
you try verify slavedisk0:filename?

Chuck 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Alex Wa
Sent: Wednesday, February 25, 2009 11:46 AM
To: lista de correo de cisco
Subject: [c-nsp] flash disk problem


Hi guys
 
I copied a file to slavedisk0: on a 6513-sup II board. when  I try to use
verify slaveslot0:filename I get this error output
 
%Error verifying slaveslot0:c6sup22-jk2sv-mz.121-22.E2.bin (Bad file number)
 
the disk was formatted in this switch and the file copied  without problems.
The issue is that i'm trying to upgrade the IOS to the new one in flash and
it can't load. 
 
I also would like to know the difference between disk0: and slot0:, i don't
fully understand it, if any.
 
thanks in advance
Alejandro 


      
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/