[c-nsp] L2 traffic tunneling

Rodney Dunn rodunn at cisco.com
Thu Feb 26 13:25:02 EST 2009


l2tpv3 or EoMPLS are options.

You have to check the hw/sw requirements against the
actual LC's you have and code.

Rodney

On Thu, Feb 26, 2009 at 09:45:51AM -0800, Drew Weaver wrote:
> We have a scenario that looks like this:
> 
> Router    Router
> HostA- Switch    Switch- HostB
> 
> The switches are each connected to both routers, but not to each other.
> 
> The routers are 12000s and the switches are 6500s.
> 
> I'm wondering what the best way besides running a really long cable to get HostA and HostB in the same VLAN.
> 
> I'm pretty sure my only choice is Q in Q but I wanted to check with you folks.
> 
> Thanks,
> -Drew
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list