[c-nsp] SPLIT ETHERNET

[Rocker Feller]

Yes this documentation is an excerpt I have from erricsson.for their GSM

Unfortunately that is as far as is explained and yes google reveals no
results.

And a diagram to explain MGW  is media gateway and GPB is
General Processor Board

so this particular switch sits at the core of the network and is the one
that connects to the other networks.

At any particular time only one ethernet is active at a time and the second
provides redundancy.

My question is how do I avoid an ip conflict on the switch an Ericsson
Media Gateway for Mobile Networks (M-MGw) R5.

Thanks



On Wed, Jan 7, 2009 at 2:48 AM, Brett Looney <brett at looney.id.au> wrote:

> > So far the documentation I have seen is
> >
> > "It presents a single IP address on multiple Ethernet Interfaces.
> > The split Ethernet function supports the usage of several Ethernet
> > interfaces in different general processor boards"
>
> Where are you seeing this documentation? I quick Google doesn't show up any
> match for that text that I can see.
>
> B.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>