[c-nsp] 7600 interfaces not showing as down

[chip]

add:
 logging event link-status

under each int

--chip

On Tue, Jan 13, 2009 at 11:29 AM, Mark Tech <techconfig at yahoo.com> wrote:

> Hi
> I have some WS-X6748-SFP  and WS-X6748-GE-TX installed on a 7600 chassis.If
> I remove a cable on an interface, there is nothing in the log to say that
> the interface is down, is there a way around this?
>
> Regards
>
> Mark
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Just my $.02, your mileage may vary,  batteries not included, etc....