[c-nsp] 7600 interfaces not showing as down

[Peter Rathlev]

On Tue, 2009-01-13 at 08:29 -0800, Mark Tech wrote:
> I have some WS-X6748-SFP  and WS-X6748-GE-TX installed on a 7600
> chassis.If I remove a cable on an interface, there is nothing in the
> log to say that the interface is down, is there a way around this?

On Tue, 2009-01-13 at 12:10 -0500, chip wrote:
> add:
>  logging event link-status
> 
> under each int

You could also use "logging event link-status default" in global config.
Then you don't have to configure each interface.

Regards,
Peter