[c-nsp] Management Interface 2960

[James Baker]

Hi Adam

Loopback is only available on Layer 3 devices. Refer:

http://supportwiki.cisco.com/ViewWiki/index.php/How_to_configure_a_loopb
ack_interface_in_Cisco_Catalyst_switch


James



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Adam g
Sent: Wednesday, 14 January 2009 11:51 a.m.
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Management Interface 2960

Is there anyway to use a loopback interface as a management interface on
a
2960?  The option to create the loopback is there, but no management is
available when I try to telnet.  I've never used a loopback on a pure
layer
2 device before, just curious to see if it was possible.

Thanks
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
----------

The information contained in this e-mail and any attachments is confidential
and is intended for the attention and use of the named addressee(s) only.
Any views expressed in this message are those of the individual sender and
may not necessarily reflect the views of Chelmer Limited.

#####################################################################################
This e-mail message has been scanned for Viruses and Content and cleared 
by NetIQ MailMarshal
#####################################################################################