[c-nsp] Management Interface 2960

[Adam g]

hmm.  Then is there any purpose for having a loopback interface on a 2960?
I am able to configure one, along with the default gateway.

On Tue, Jan 13, 2009 at 4:33 PM, James Baker <James.Baker at chelmer.co.nz>wrote:

> Hi Adam
>
> Loopback is only available on Layer 3 devices. Refer:
>
> http://supportwiki.cisco.com/ViewWiki/index.php/How_to_configure_a_loopb
> ack_interface_in_Cisco_Catalyst_switch
>
>
> James
>
>
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Adam g
> Sent: Wednesday, 14 January 2009 11:51 a.m.
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Management Interface 2960
>
> Is there anyway to use a loopback interface as a management interface on
> a
> 2960?  The option to create the loopback is there, but no management is
> available when I try to telnet.  I've never used a loopback on a pure
> layer
> 2 device before, just curious to see if it was possible.
>
> Thanks
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> ----------
>
> The information contained in this e-mail and any attachments is
> confidential
> and is intended for the attention and use of the named addressee(s) only.
> Any views expressed in this message are those of the individual sender and
> may not necessarily reflect the views of Chelmer Limited.
>
>
> #####################################################################################
> This e-mail message has been scanned for Viruses and Content and cleared
> by NetIQ MailMarshal
>
> #####################################################################################
>