[c-nsp] What does mean Unknown state in Online diag.. 7609 Router

[omar parihuana]

Hi Folks,

Recently I've installed a SPA-2XT3/E3 card (in module 7), but I get unknown
state in online diagnostic, what does mean this "Unknow", because the led
status in card is ok, and the sh diagbus also is ok:

Mod  Sub-Module                  Model              Serial       Hw
Status
---- --------------------------- ------------------ ----------- -------
-------
7/0 2xOC3 ATM SPA               SPA-2XOC3-ATM      JAE1217FPTR  1.1    Ok
 7/1 2xT3E3 SPA                  SPA-2XT3/E3        JAE1219H6QE  1.1    Ok

Mod  Online Diag Status
---- -------------------
  1  Pass
  5  Pass
  6  Pass
  7  Pass
 7/0 Not Applicable
 7/1 Unknown   <<<<<<<<<<<<<<<<<<<<<<<<<<
  8  Pass
 8/0 Not Applicable
 8/1 Not Applicable


Slot 7: Logical_index 14
        4-subslot SPA Interface Processor-200 controller
        Board is analyzed ipc ready
        HW rev 2.303, board revision C0
        Serial Number: JAE1220HSI2 Part number: 73-10476-03

        Slot database information:
        Flags: 0x2004   Insertion time: 0x17E48 (1w4d ago)

        Controller Memory Size:
                832 MBytes CPU Memory
                191 MBytes Packet Memory
                1023 MBytes Total on Board SDRAM
        Cisco IOS Software, cwlc Software (sip1-DW-M), Version 12.2(33)SRB3,
RELEASE SOFTWARE (fc1)

        SPA Information:
        subslot 7/0: SPA-2XOC3-ATM (0x46E), status: ok
        subslot 7/1: SPA-2XT3/E3 (0x40C), status: ok

Thanks!!
-- 
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!