[c-nsp] Set Virtual-Template 'ip wccp x redirect in' via RADIUS attribute on LNS

[Barry O'Donovan]

Alex, all

Thanks for that. Someone else suggested something similar offlist. 

For the record, the following worked:

+-------+-----------------+-------------------+----+------------------------------------------------+
| id    | UserName        | Attribute         | op | Value                                          
|
+-------+-----------------+-------------------+----+------------------------------------------------+
| 56850 | test at xxxxxxx.yy | Cisco-AVpair      | =  | lcp:interface-config=no 
ip wccp 97 redirect in |
+-------+-----------------+-------------------+----+------------------------------------------------+

 - Barry

On Tuesday 20 January 2009 18:44:10 listensammler at gmx.de wrote:
> Hi Barry,
>
> > 2) have RADIUS specify an attribute that can add the 'ip wccp 97 redirect
> > in' statement dynamically.
>
> i think following Reply-Item should work to
>
> Attribut:    Cisco-AVPair
> Value:      lcp:no ip wccp 97 redirect in
>
> So you can disable wccp for selected users.
> If you prefer the to enable it for different users, you have to remove
> "ip wccp 97 redirect in" from virtual-template1 and use this Reply-Item:
>
> Attribut:    Cisco-AVPair
> Value:      lcp:ip wccp 97 redirect in
>
> I couldn't test i by myself, because we don't use wccp-feature....
>
> Regards,
> Alex Detzen
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20090122/287f62c4/attachment.bin>