[c-nsp] Set Virtual-Template 'ip wccp x redirect in' via RADIUS attribute on LNS

[listensammler at gmx.de]

Hi Barry,
> 2) have RADIUS specify an attribute that can add the 'ip wccp 97 redirect in' 
> statement dynamically.
>   
i think following Reply-Item should work to

Attribut:    Cisco-AVPair
Value:      lcp:no ip wccp 97 redirect in

So you can disable wccp for selected users.
If you prefer the to enable it for different users, you have to remove 
"ip wccp 97 redirect in" from virtual-template1 and use this Reply-Item:

Attribut:    Cisco-AVPair
Value:      lcp:ip wccp 97 redirect in

I couldn't test i by myself, because we don't use wccp-feature....

Regards,
Alex Detzen