[c-nsp] New with Cisco

[Seth Mattinen]

Michael K. Smith wrote:
> Hello Dan:
> 
> 
> On 1/28/09 5:20 PM, "Dan Ciora" <dan.c at catalinajazzclub.com> wrote:
> 
>> Hello,
>> My name is Dan and I just start working with Cisco Router.
>> We have a router 800 Series that was working perfect. We had to upgrade
>> the point of sale application, and the new version needs to comunicate
>> in through the router on the port: TCP8443 and UDP8443.
>>  
> <snip>
> 
> Check out http://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers for
> a list of well-known port numbers in use and the names associated with them.
> With your ACL, assuming 130 is the one on your outside interface, you should
> add:
> 
> access-list 130 permit tcp any any eq 8443
> access-list 130 permit udp any any eq 8443
> 

He already has a "access-list 130 permit ip any any" statement in there.

~Seth