[c-nsp] IGMP snooping ME6500

[Tim Stevenson]

Note that you can have a pim-enabled interface with ip 
multicast-routing disabled and that should work too - though then the 
RP CPU will be setting up state (at L3) for no particularly good 
reason. The querier function is to avoid all that. Let us know if it 
improves things.

Tim

At 12:40 PM 7/12/2009, Adrian Minta remarked:
>Creating an unnumbered interface didn't seems to work. Now I am trying
>your solution, the one with "ip igmp snooping querier". I don't want to
>involve the switches in any multicast routing.




Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Cisco Nexus 7000
Cisco - http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.