[c-nsp] IGMP snooping ME6500

[Adrian Minta]

Tim Stevenson wrote:
> Note that you can have a pim-enabled interface with ip 
> multicast-routing disabled and that should work too - though then the 
> RP CPU will be setting up state (at L3) for no particularly good 
> reason. The querier function is to avoid all that. Let us know if it 
> improves things.
>
> Tim
>
No, It didn't do any good :(

Right now this is my config:
!
vlan 200
 name ipTV1
!
vlan 201
 name ipTV2
!
...
!
interface Vlan200
 ip address 10.201.0.2 255.255.255.0
 ip igmp snooping querier
 shutdown
end
!
interface Vlan201
 ip address 10.201.1.2 255.255.255.0
 ip igmp snooping querier
 shutdown
end

A switch linked with ME6500 by a trunk still receive all the active iptv 
traffic, even if the above vlans are not even present on his config.

-- 
Best regards,
Adrian Minta    MA3173-RIPE, MA314-ROTLD, www.minta.ro