[c-nsp] IGMP snooping ME6500

[Tim Stevenson]

Please do a sh ip igmp snooping mrouter - is the trunk being learned 
as a mrouter port? Note that mrouter ports get all multicast traffic 
for all groups.

Tim

At 11:25 AM 7/13/2009, Adrian Minta asserted:

>Tim Stevenson wrote:
> > Note that you can have a pim-enabled interface with ip
> > multicast-routing disabled and that should work too - though then the
> > RP CPU will be setting up state (at L3) for no particularly good
> > reason. The querier function is to avoid all that. Let us know if it
> > improves things.
> >
> > Tim
> >
>No, It didn't do any good :(
>
>Right now this is my config:
>!
>vlan 200
>  name ipTV1
>!
>vlan 201
>  name ipTV2
>!
>...
>!
>interface Vlan200
>  ip address 10.201.0.2 255.255.255.0
>  ip igmp snooping querier
>  shutdown
>end
>!
>interface Vlan201
>  ip address 10.201.1.2 255.255.255.0
>  ip igmp snooping querier
>  shutdown
>end
>
>A switch linked with ME6500 by a trunk still receive all the active iptv
>traffic, even if the above vlans are not even present on his config.
>
>--
>Best regards,
>Adrian Minta    MA3173-RIPE, MA314-ROTLD, www.minta.ro
>
>




Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Cisco Nexus 7000
Cisco - http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.