[c-nsp] Power Upgrade 7600
Mikael Abrahamsson
swmike at swm.pp.se
Mon Jul 13 12:54:18 EDT 2009
On Mon, 13 Jul 2009, Paul Stewart wrote:
> So, can you install a larger power supply on one side and then the other
> without any effect?
Yes, but you have to switch it to combined power mode before putting in
the higher rated one, power it up, check that everything looks ok, take
out the smaller one, put in the equivalent other bigger one, check that
everything looks ok, then switch back to redundant mode.
--
Mikael Abrahamsson email: swmike at swm.pp.se
More information about the cisco-nsp
mailing list