[c-nsp] ASA IPsec Tunnel Failover

[Prabhu Gurumurthy]

Answer is: BGP

On Jul 13, 2009, at 1:14 PM, Munoz, Jeff wrote:

> Hey guys, I have two main sites (site A and site B) and one remote  
> site (site C).  Sites A and B have a metroethernet connection  
> between them.  Remote site C has an IPsec tunnel back to site A.   
> I'd like to setup failover so in case site A's ASA is down the  
> remote site C ASA sends the interesting traffic down the site B  
> IPsec tunnel.  Unfortunately, it will always match the tunnel to  
> site A since the phase 2 access lists have the same source/ 
> destinations.  Any ideas on how I can do this?
>
> Thanks!
>
> Jeff
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/