[c-nsp] IGMP snooping ME6500

[Adrian Minta]

Tim Stevenson wrote:
> Ok - if you have mrouter ports being learned, then the upstream router 
> should be sending IGMP queries already & IGMP snooping querier is not 
> required.
>
> You may want to check the igmp snooping stats & see what type of joins 
> etc are being seen on 1/26. Also what is the downstream switch doing 
> from a snooping standpoint?
>
> Probably you should just open a case w/TAC to get to the bottom of 
> this one.
> Tim
>
> At 12:01 PM 7/13/2009, Adrian Minta asserted:
>
>
Thank you all ! I think I will start this process.

-- 
Best regards,
Adrian Minta