[c-nsp] ip per-packet load-sharing on single interface

[Joe Maimon]

If I read those numbers right, the router seems to think it is doing per 
packet load balancing.

Perhaps the problems is elsewhere. I have sent the output direct.

Thanks for your help.

Joe

Rodney Dunn wrote:
> Turn on 'ip cef account load per pre'
> and send the 'sh ip cef internal' for the prefix you are going towards.
> 
> On Wed, Jul 15, 2009 at 10:33:34PM +0200, Arie Vayner (avayner) wrote:
>> Joe,
>>
>> Which platform is it?
>> Can you share "show ip route" and "show ip cef internal"?
>>
>> Arie
>>
>> -----Original Message-----
>> From: cisco-nsp-bounces at puck.nether.net
>> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Joe Maimon
>> Sent: Wednesday, July 15, 2009 22:29
>> To: cisco-nsp
>> Subject: [c-nsp] ip per-packet load-sharing on single interface
>>
>> ip per-packet load-sharing on single ethernet interface with multiple 
>> iBGP routes installed to different nodes on that ethernet interface.
>>
>> Software router, 12.3
>>
>> Does not seem to be balancing. Is this supposed to work?
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>