[c-nsp] Software versioning on SUP720s
Bill Blackford
BBlackford at nwresd.k12.or.us
Fri Jul 17 11:17:57 EDT 2009
I recently installed these sups and the 6748. I'm noticing that the active sup lists the IOS I'm booting up from the CF card and the in-active sup lists the IOS on sup-bootflash. The 6748 lists the newer IOS as well.
1. Is this a problem?
2. If #1 = yes, then how must one fix the problem?
Thank you
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 48 48 port 10/100 mb RJ45 WS-X6348-RJ-45 SAL
2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL
3 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC SAD
4 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC SAL
5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL SAL
6 2 Supervisor Engine 720 (Cold) WS-SUP720-3BXL SAL
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0004.2861.2750 to 0004.2861.277f 2.2 5.4(2) 8.7(0.22)BUB Ok
2 0025.840c.9310 to 0025.840c.933f 3.0 12.2(18r)S1 12.2(33)SXH5 Ok
3 0002.fc25.0984 to 0002.fc25.098b 1.3 5.4(2) 8.7(0.22)BUB Ok
4 0008.a4f6.1784 to 0008.a4f6.1793 2.2 5.4(2) 8.7(0.22)BUB Ok
5 001f.6c77.13b0 to 001f.6c77.13b3 5.8 8.5(3) 12.2(33)SXH5 Ok
6 001f.6c77.13c8 to 001f.6c77.13cb 5.8 8.5(3) 12.2(18)SXF1 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
2 Centralized Forwarding Card WS-F6700-CFC SAL 4.1 Ok
5 Policy Feature Card 3 WS-F6K-PFC3BXL SAL 1.10 Ok
5 MSFC3 Daughterboard WS-SUP720 SAL 3.3 Ok
6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL 1.10 Ok
6 MSFC3 Daughterboard WS-SUP720 SAL 3.3 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
6 Pass
-b
--
Bill Blackford
Senior Network Engineer
Northwest Regional ESD
my /home away from home
More information about the cisco-nsp
mailing list