[c-nsp] L3 Etherchannel on ASR / IOS-XE

[Elmar K. Bins]

Re Brandon,

brandon at burn.net (Brandon Applegate) wrote:

> Is anyone doing it ?  I don't have many options for config on the ASR 
> side.  On the other side (7609-S) I'm using channel mode 'on'.  It's just 
> not passing traffic.  Searched CCO, IOS-XE config guide etc.  If there is 
> a magic formula to make it work, I'd love to know.  Thanks in advance.

I'm using L2 etherchannel out of the box (if you can call
that L2...), and I discovered that you need the very very
latest IOS to get that going.

asr1000rp1-adventerprisek9.02.04.00.122-33.XND.bin is the image I'm
using in the test setup. Everything else did just not work.

HTH,
	Elmar.