[c-nsp] ASA Multiple Context Mode

Ryan West rwest at zyedge.com
Sun Jul 19 14:33:04 EDT 2009


Clue,

I am pretty sure that it doesn't support SSL VPN's either.  All NetPro discussions show the same results.  Assuming you are support multiple customers and want to give them access to their firewall, or whatever you reason for choosing multiple context may be, you should use another ASA pair in Active/Standby to provide VPN termination services.  You may have to mess around with RRI, but you should be able to pull off customer segregation using VLANs.

-ryan

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Clue Store
Sent: Sunday, July 19, 2009 2:14 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ASA Multiple Context Mode

Hi All,


As I understand that the ASA in multiple context mode does not support
"VPN's", does this also inclue SSL VPN's?? Someone has mentioned that it
turns off IPSEC engine in this mode, but I have not been able to find
anywhere where it says SSL VPN's are not supported. If it doesn't support
SSL VPN, what are other folks doing for VPN's in this situation where
multiple contexts are being used??

TIA,
Clue
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list