[c-nsp] persistent debug

[Shimol Shah ( Cisco )]

Not tried it myself but below has two solutions:

http://blog.ioshints.info/2007/06/re-enable-debugging-on-router-reload.html


HTH

Adam Greene wrote:
> Hi,
> 
> I like to leave "debug ip bgp updates" running on customer edge routers 
> with whom I do eBGP peering, to track outage events.
> 
> However, the debugging command always goes away after the customer 
> router reboots. Any way to make this persistent? (i.e. when router 
> reboots, bgp update debugging gets automatically enabled?)
> 
> Thanks,
> adam
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/