[c-nsp] persistent debug

[Adam Greene]

Will give it a try, Shimol. Thanks!

----- Original Message ----- 
From: "Shimol Shah ( Cisco )" <shimshah at cisco.com>
To: "Adam Greene" <maillist at webjogger.net>
Cc: <cisco-nsp at puck.nether.net>
Sent: Monday, July 20, 2009 5:50 PM
Subject: Re: [c-nsp] persistent debug


> Not tried it myself but below has two solutions:
>
> http://blog.ioshints.info/2007/06/re-enable-debugging-on-router-reload.html
>
>
> HTH
>
> Adam Greene wrote:
>> Hi,
>>
>> I like to leave "debug ip bgp updates" running on customer edge routers 
>> with whom I do eBGP peering, to track outage events.
>>
>> However, the debugging command always goes away after the customer router 
>> reboots. Any way to make this persistent? (i.e. when router reboots, bgp 
>> update debugging gets automatically enabled?)
>>
>> Thanks,
>> adam
>>
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>