[c-nsp] no keepalive in eth interface

[Rodney Dunn]

Some device drivers will not honor no keeps as a signal if the line 
isn't connected.

Loopback cable should work.

Rodney



Alex Wa wrote:
> Hi guys,
>  
> I disabled keepalives in an FastEthernet interface (3750 24P), but the interface is still showing down/down status. Is there other things to take into account to show up/up with the no keepalive?
>  
> thanks in advance
> Alejandro Wainshtok
> 
> 
>       
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/