[c-nsp] OSPF NSSA question

[Walter Keen]

Are you sure you want to use NSSA areas instead of totally stubby areas?

http://packetlife.net/blog/2008/jun/24/ospf-area-types/

Ruben Alvarez wrote:
> Hello,
>
> I have a question.  I have recently setup a second OSPF area.  The ABR has
> three routers connected to it (area 1) in a hub and spoke configuration.
> The routers get a default route to the ABR via default information
> originate.  Now the ABR has all the N2 routes for the three routers.  But so
> do all three routers, which isn't needed.  They only have one interface and
> a default route.  Is there a way I can ignore all routes in the area except
> the default route coming from the ABR? 
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>   

-- 


Walter Keen
Network Technician
Rainier Connect
(o) 360-832-4024
(c) 253-302-0194